The installation method of the electric meter box mainly includes the following steps:

Preparation stage: Firstly, check whether the meter box and its required parts meet the specified model and are in good condition. Prepare the necessary tools for installation, such as screws, screwdrivers, etc.

Choose installation location: The meter box should be installed in a location where there is no severe vibration and the impact force is not strong, avoiding prolonged direct sunlight to ensure the normal operation and service life of the meter box. At the same time, the meter box should be installed at a certain height for easy operation and meter reading, usually not exceeding 2.5 meters in height.

Installation of electric meter box: Place the electric meter box in the designated position, keep it installed vertically, and the inclination angle should not exceed the specified standard. Use screws to secure the meter box to the wall, ensuring a secure installation.

Wiring: According to the wiring requirements of the electric energy meter, connect the wires to the junction box of the meter box. When wiring, corresponding wiring principles should be followed, such as single-phase energy meters must connect the phase line to the current coil, and three-phase four wire energy meters must be wired in positive phase sequence. At the same time, the screws on the terminal heads should be tightened to prevent heating when high currents pass through.

Inspection and debugging: After installation, check if the wiring of the meter box is correct and if all components are securely installed. Then, perform power on debugging to ensure that the meter box can work properly.

Subsequent maintenance: After the installation of the meter box, regular cleaning and maintenance should be carried out to keep the meter box and its surrounding environment clean. At the same time, pay attention to checking whether the meter box is damaged or abnormal, and promptly handle it.

By following the above steps, the safe, stable, and reliable operation of the electricity meter box can be ensured.