Ready Board equipment plays an important role in our life. Many houses and machine rooms will install Ready Board equipment. There are many equipment in the machine room and the lines are complex. What problems should be paid attention to when installing Ready Board equipment? Next, the manufacturer of Ready Board will introduce the installation precautions for you.

Note 1: selection of installation location. In the actual installation process, if the location of the distribution cabinet is not very perfect or different from the actual site requirements, the installation personnel shall timely submit modification opinions to the design unit, and the designer shall conceive according to the construction drawings or investigate the actual construction site, and it is necessary to meet the actual needs without affecting the appearance, Determine the actual installation position of the distribution cabinet.

Note 2. It is a basic skill for a qualified electrician to determine the reasonable installation position according to the actual needs of the site, determine the installation height according to the specification and firmly install the distribution cabinet. According to the specification, the height from the bottom of the distribution cabinet to the ground is generally 1.4m, which can also be increased or reduced according to the convenience of actual operation and maintenance, and with the consent of the design unit.

Note 3. Select the conductor color according to the specification. When wiring in the three-phase power distribution cabinet, the power incoming line, load outgoing line and the connecting line of electrical components in the box shall be selected according to the specification. That is, phase A is color, phase B is green, phase C is red, and the neutral line is light blue or black. The ground wire is a yellow / Green two-color wire. It is strictly prohibited to use the Yellow / Green two-color wire as other wires. The connection of incoming and outgoing lines in the box shall be fine and the arrangement shall be tight.

Note 4. The conductor shall be connected tightly and firmly. The box body shall be provided with safe and reliable neutral wire terminal and ground wire terminal. The connection between the connecting conductor, power incoming line and load outgoing line in the distribution cabinet and the electrical components shall be tight and firm without looseness. The stripping length of the conductor shall be appropriate, the core wire shall not be exposed, and the crimping shall be tight. The distribution cabinet shall be provided with complete neutral wire terminal according to the line, The box shall be provided with firm and reliable protective grounding terminals.

Note 5. Keep the inside and outside of the box clean and clearly mark the number of distribution cabinet. After the installation of the distribution cabinet, the sundries shall be eliminated and kept clean and tidy. The purpose and number of the electrical circuit shall be clearly marked on the surface of the distribution cabinet for future maintenance.

The above are some precautions about the installation of the Ready Board equipment sorted out by the Ready Board factory. When installing the equipment, pay attention to the selection of the installation position, select the conductor color according to the specifications, and keep the inside and outside of the box clean.