Benefits of distribution box

How to deal with a power failure at home, how to deal with a power failure at work in the company, when there is a fault, as long as there is a distribution box, you don't have to worry.

The distribution box is mainly assembled in a closed metal cabinet or on the screen according to the switch equipment of electrical wiring, protective appliances and auxiliary equipment. In normal times, it can also turn on or off the switch with the help of manual or automatic switch. In case of failure, it can also cut off the circuit or alarm with the help of protective appliances, You can also borrow some instruments to display the various parameters of the current operation, because this gives us a very good safety protection level.

Therefore, in the general family, the distribution box is still needed, not only in the home circuit problems, the distribution box can be protected safely.

Quality requirements of distribution box

1、 Install the protection wire of the distribution box, and the connection is reliable.

2、 There shall be no exposed bare charged body outside the cabinet (box); The electrical components to be installed on the outer surface of the cabinet (box) or on the distribution board shall be protected by screen.

3、 The electrical components, instruments, switches and circuits of the distribution box shall be arranged in order, firmly installed and easy to operate; The cabinet (box) should be free of dust, water and debris.

4、 The distribution box shall be made of non combustible materials.

5、 The bottom of the floor mounted distribution cabinet (box) shall be 50 ~ 100 mm higher than the ground; The height of operating handle is generally 1.2-1.5m; There are no obstacles within the range of 0.8-1.2m in front of the cabinet (box).

6、 Open type distribution boards can be installed in production places and offices with low risk of electric shock.

7、 Closed cabinets should be installed in processing workshops, casting, forging, heat treatment, boiler rooms, woodworking rooms with high risk of electric shock or poor working environment.

8、 Closed or explosion-proof electrical facilities shall be installed in hazardous workplaces with conductive dust or flammable and explosive gases.