Specification Requirements For Installation Height And Installation Position Of Lighting Electrical Ready Board
The installation height and position of the lighting electrical ready board need to comply with certain regulatory requirements to ensure its safety, reliability, and ease of operation. The following is a detailed explanation of these regulatory requirements:
Installation height specification requirements
General situation: The installation height of the lighting electrical ready board should ensure that the distance between the bottom and the ground is not less than 1.8 meters to ensure safety and convenience during operation.
exceptional case:
In the basement or first floor corridor, the height of the exposed bottom edge of the lighting electrical ready board from the ground may be slightly lower, but generally not less than 1.5 meters.
When the height of the electrical ready board body is greater than 0.8 meters, the center to ground distance of the wall mounted electrical ready board should be 1.3 meters; When the height of the box is less than 0.8 meters, the center to ground distance of the wall mounted electrical ready board should be 1.5 meters.
Installation location specification requirements
Safety: The lighting electrical ready board should be installed in a dry, ventilated, and unobstructed location, avoiding installation in damp, flammable, or explosive environments.
Convenience: The installation location of the electrical ready board should be easy to operate and maintain, avoiding installation in high or low positions.
Rationality: The electrical ready board should be installed near the power source to facilitate the reasonable distribution and control of electrical energy. At the same time, it should be avoided to install in places with gas hazards or susceptible to moisture and grease, such as kitchens.
In summary, the installation height and location of the lighting electrical ready board need to comprehensively consider multiple factors such as safety, convenience, and rationality to ensure its normal operation and safety of use.