The fire protection design of lighting electric ready boards is an important part of ensuring building safety, and its relevant regulations mainly include the following aspects:

Firstly, in the selection of electric ready boards, products that meet fire safety requirements should be chosen. Especially in specific places such as tunnels and humid environments, electric ready boards with a protection level of not less than IP65 should be selected to ensure their stable operation in harsh environments. At the same time, the electric ready board should have a reliable design for separating the inlet and outlet ports to prevent electrical fires from occurring.

Secondly, in the setting of the electric ready board, full consideration should be given to its location and the division of fire zones. Each fire compartment in densely populated areas should be equipped with an independent emergency lighting electric ready board, so that in the event of a fire, the power can be quickly cut off to prevent the spread of the fire. In non densely populated areas, a shared electric ready board can be installed in multiple adjacent fire compartments according to the actual situation. In addition, independent emergency lighting electric ready boards should be installed in smoke proof stairwells and enclosed stairwells to ensure the lighting needs of evacuation routes.

In terms of power supply, the emergency lighting electric ready board should be powered by the dedicated emergency circuit of the fire power supply or the fire power electric ready board located in the fire compartment. This can ensure that the electric ready board can provide continuous power supply in the event of a fire, providing a stable light source for emergency lighting.

In addition, the fire protection design of the electric ready board should also consider the laying and protection of its internal circuits. The circuit should be wrapped in fire-resistant materials to prevent secondary fires caused by short circuits in the circuit during a fire. At the same time, overload, short circuit and other protective devices should be installed inside the electric ready board to ensure its safe operation.

In summary, the relevant specifications for fire protection design of lighting electric ready boards involve multiple aspects, including the selection, installation, power supply, and line laying of electric ready boards. Only by strictly following these specifications in design and construction can we ensure the safe and stable operation of the electric ready board in the event of a fire.