The three connection modes of Ready Board manufacturers have their own advantages and disadvantages. In specific applications, different connection processes can be selected by comprehensively considering the structure and purpose of the box. People working in the power industry will encounter such problems. The operation surface of some drawings of low-voltage Ready Board is wide side, and the writing is long side. Is the operation surface long or wide?

Is the low-voltage Ready Board reliably placed on the wall? When two rows of low-voltage Ready Boards face to face, what is the small distance and the small distance against the wall? About the above three questions, the Ready Board factory will give you specific answers. 1、 The operating surface of the switch box is related to the form of the box and the layout of components, which can be wide or narrow, but the depth of the box should be consistent with the whole row of low-voltage group boxes.

The low-voltage Ready Board of the Ready Board manufacturer can be installed against the wall, but the box form of operation in front of the board and maintenance in front of the board should be adopted. 3、 Two rows of low-voltage Ready Boards face to face. Considering the convenience of operation and maintenance, the small distance shall not be less than 1.8m.

The distance from the back to the wall shall not be less than 0.8m. Hybrid connection of welding and fastening: at the same time, traditional welding and fasteners are used to connect the box together. It can concentrate the advantages of the above two methods. Generally, electric welding is adopted at the connection of the box, and the variable or adjustable parts are connected with fasteners.

If the Ready Board manufacturer blindly puts the distribution room equipment with internal short circuit into operation, the previous efforts will be wasted and the safe operation of the superior power grid will be endangered. Management of all links. Strictly control all links and make every step of the details.