1. Please carefully check whether all parts of the meter box (split meter ready board) are in good condition during installation.

2. The meter box (split meter ready board) shall be installed vertically. The inclination angle shall not exceed 54 °.

3. The installation position should be selected where there is no violent vibration, impact and insufficient corrosion of electrical components.

4. The materials used in the meter box (split meter ready board) are not resistant to strong bases, oxidizing acids, amines and ketones. Soluble in chlorinated and aromatic solvents. Therefore, contact with or use with these chemicals should be avoided.

5. Avoid sharp objects and hard objects from colliding and scratching the surface of the meter box (split meter ready board) during use.