The manufacturer of Ready Board suggests that ignoring the quality problems when purchasing Ready Board will affect the service performance of products. In order to ensure the purchasing quality of Ready Board products, the manufacturer of Ready Board reminds us that we should pay attention to the following four points when purchasing:

1. Complete materials, including system diagram, control schematic diagram and wiring diagram of distribution cabinet and Ready Board; Certificate of conformity and operation manual of components in the cabinet; Factory inspection report of distribution cabinet and Ready Board, etc.

2. Open the box and cabinet, the box and cabinet shall be clean and tidy, the arrangement position of components shall be reasonable, the operation shall be convenient and the wiring shall be regular. The electrical clearance and creepage distance meet the requirements of national standards. The contact shall be firm and reliable, the wire diameter shall meet the requirements, and there shall be no breakpoint for grounding.

3. The selected distribution cabinet and Ready Board shall have safety signs, and the product appearance shall be complete without damage.

4. Check the system diagram with the product to see whether the product is consistent with the system diagram and meets the user or design requirements. The Ready Board manufacturer's direct sales remind us that we should pay attention to the following five points when storing and using the Ready Board: the door of the distribution room should be guarded by a specially assigned person. It is not allowed to enter casually to prevent the loss of devices. Before the project acceptance, the Ready Board (cabinet) cannot be used as temporary construction power. Party A shall assign electricians to explain the operation of the electrical equipment and pay attention to the correct operation of the electrical equipment according to the instructions of Party A.

When the Ready Board (cabinet) is transported on site, it shall be bound and fixed with soft ropes to prevent bumping, surface paint or scratch. The direct seller of the Ready Board manufacturer said that after the Ready Board (cabinet) is installed on site, the door should be locked in time and the rear guard and side plate should be tightened. If the interior needs fine decoration, it shall be covered with waterproof cloth, and dust and sundries shall not enter.