The neat construction of internal wiring in lighting electrical ready boards is an important link to ensure the safe and stable operation of the power system. The following are the key steps to achieve this goal:

Firstly, construction personnel need to be familiar with the design drawings, clarify the number of circuits in the electrical ready board system, as well as the specifications, models, and quantities of components. During the construction process, accurate wire positioning should be carried out according to the design drawings to ensure the accurate installation position of the electrical ready board.

Secondly, the wiring inside the electrical ready board should be arranged neatly and there should be no ripple phenomenon. The wires need to be tied with plastic ties, which should be of appropriate size and evenly spaced to maintain the cleanliness and aesthetics of the wiring. At the same time, the bending of the wire should be consistent to avoid dead bends and prevent damage to the wire insulation and internal copper core.

During the wiring process, construction personnel also need to pay attention to the selection of lighting circuit wires. Generally speaking, lighting and socket circuits should use 2.5 square millimeter wires, and the number of air switches connected in series by each wire should not exceed 3. This can ensure smooth current transmission while ensuring the safety and stability of the system.

In addition, the wiring between the main circuit breaker and each branch circuit breaker inside the electrical ready board is usually located on the left side, while the outgoing lines are generally located on the right side. This layout helps construction personnel quickly identify and connect various circuit wires, improving work efficiency.

Finally, construction personnel should also pay attention to personal safety protection when carrying out wiring integration construction. They should wear protective equipment such as insulated gloves and goggles to prevent accidents such as electric shock.

In summary, the neat construction of the internal wiring of the lighting electrical ready board requires construction personnel to strictly follow the design drawings and pay attention to the requirements of wire selection, binding, bending, and safety protection.