Usually we can taste the place where we see the power electrical distribution board in our daily life, and it will belong to our home. Therefore, the electrical distribution board can also be called " ...
In today's society of in-depth research and development of electrical power distribution boards, there are many equipment classifications that are also often in front of people. Now the electrical pow ...
In the level of distribution board, it can be divided into one, two and three levels according to its own performance. Now the distribution board factory will share with you how the three levels of di ...
Normally, distribution boards with special models are usually processed from ordinary distribution boards. So today, the distribution board manufacturer will share the differences between ordinary dis ...
Today, the distribution board factory will share with you what kinds of distribution boards are often seen in daily life. Now let's have a look! 1. Generally speaking, the distribution board can be d ...
We believe that you can also see two very similar but different products in your daily life. This is true of low-voltage switchgear and electrical distribution board. Next, the electrical distribution ...
Today, the small power distribution box (ready board) factory is going to share with you the differences between the meter box and the small power distribution box (ready board) in daily life. Now let ...
In order to make better use of the performance of the ready board box itself, users often need to be fully prepared when purchasing the ready board box. Next, the ready board box factory will share wi ...
In daily life, the ready board box is usually small, but its technical performance is special; The installation location will be relatively fixed, simple and free from site restrictions. Therefore, wh ...
When using the power ready board box (small power distribution box), we pay attention to the use quality of the power ready board box (small power distribution box). Of course, in the use of ready boa ...
When installing cables for the waterproof ready board box (small power distribution board), the following must be paid attention to. For plugs and sockets with different current ratings, cable glands ...
The taboos in the installation of ready board with bulkhead must not be violated. for instance: 1. No inspection is conducted on site The consequences of doing so are often discovered after installa ...
To understand why the electrical ready board box trips, we need to check whether the circuit breaker is damaged. Secondly, check whether the circuit breaker wiring is correct. Incorrect and reconnect. ...
During the installation of the split mertering ready board, if its position is not perfect, it is necessary to timely put forward suggestions to the design unit. Generally, the requirements for the en ...
When you find that the working meter box (ready board) is on fire, remember not to act without knowledge of fire fighting to avoid unnecessary injury. If the meter box (ready board) is on fire, do not ...
Among the non-metallic materials of single-phase meter box, fiber-reinforced polyester material has very good anti-aging performance. The anti-aging performance test shows that the surface aging thick ...
When installing the three-phase meter box (split meter ready board), first use the ventilation component to ventilate the box to prevent excessive distilled water. Remember that there are ventilation ...
First of all, the electrical performance of the household electrical ready board should be very good. Therefore, the material used to make it is usually fiber reinforced polyester used to make electri ...
Wall mounted electrical distribution board is applicable to circuits with AC frequency of 50Hz and rated working voltage of 500V and below. Under special requirements, the protection grade can reach I ...
The single-phase electric meter box (split meter ready board) is a distribution box for installing single-phase electric meters. The door has a meter reading window. It is mainly used in civil buildin ...
The three-phase meter box (split meter ready board) can only be installed and used after passing the inspection and being sealed with lead seal when it leaves the factory. If there is no lead seal or ...
The electrical control distribution box is applicable to factories, mines, enterprises, shopping malls, hotels, schools, airports, ports, hospitals, high-rise buildings, living quarters and other occa ...
The shell of the stainless steel control small power distribution box can be made of stainless steel plates of various brands. It is welded by automatic shielded gas welding. After welding, the surfac ...
The waterproof distribution box (small power distribution board) is usually made of SMC composite material as the shell molding material. SMC composite is composed of unsaturated polyester resin as ma ...
