Ready Board Box is an important electrical equipment for managing circuit switches in daily life. It is convenient to manage and maintain power supply and ensure the safety of our daily electricity use. Some people say that the Ready Board Box has been insulated. Why does it feel like an electric shock?

The case leakage may be caused by the earth wire not being properly connected or not being grounded, which will cause leakage; In addition, the aging of wires at home is also one of the reasons, so it is necessary to carefully check and apply the right medicine to the case.

How to solve the case leakage? Install some special anti leakage equipment in the Ready Board Box manufacturer, or use composite insulation materials. The insulation composite materials are safe to use: they have high functional insulation resistance, which can avoid leakage. It can maintain excellent dielectric energy at high frequency, does not reflect, block the transmission of microwave, does not rust, and can be used for a long time to avoid electric shock of the box.

The Ready Board Box can also be installed in a modular way, which is suitable for handling, easy to install, and can be assembled or disassembled on site. High temperature resistance and low deformation rate can reduce the impact of environmental temperature difference on the interior of the box. Compared with metal materials, it can effectively reduce the condensation and frost inside the box. Moreover, it has a unique and beautiful shape and does not affect the decoration of the house.

The manufacturer of the Ready Board Box must install it firmly, and the operation should be convenient. There should be no dust, water and sundries in the box. The bottom of the box shall be 50~100mm higher than the ground, and there shall be no exposed copper wires outside. When operating the box, ensure that the internal components are in good contact, and there shall be no serious problems such as excessive heating or burns.