The installation of household small power distribution box (ready board) can not be ignored, which relates to the safety of household electricity. The following small power distribution box (ready board) factory tells you the installation requirements of the household small power distribution box (ready board) to create a beautiful and safe home for you.

1. The household small power distribution box (ready board) shall be installed in a dry and ventilated place, free of obstacles and convenient for use.

2. The household small power distribution box (ready board) should not be installed too high. The general installation elevation is 1.8m for easy operation.

3. The electric pipe entering the household small power distribution box (ready board) must be fixed with locking nuts.

4. If the household small power distribution box (ready board) needs holes, the edges of the holes must be smooth and clean.

5. When the household small power distribution box (ready board) is embedded in the wall, it shall be vertical and horizontal, with a gap of 5-6mm reserved at the edge.

6. The wiring in the household small power distribution box (ready board) shall be regular and orderly, and the terminal screws shall be fastened.

7. The incoming line of each circuit shall be of sufficient length without joints.

8. After installation, indicate the name of each circuit.